Flooring Oxide

Product Details:

Orange Oxide is a highly concentrated dry powder of the finest grade and is ideally suited for use in paints, rubber, paper, polishing rouge, ceramic, linoleum, wall paper, plastic asphalt,
cement colours, mosaic tiles and flooring. It is also plays a role in foundry core making and ferrite, which is used by the electronic industries.

Other Details:

• Conforms to Bureau of Indian Standard Specification No. IS 44-1991

Product Details:

Salient Features:

• Tata Black is ideally suited for flooring as they have the best mobility with cement.
• Light fastness and alkali resistance are excellent
• Tata Black provides a brightness and smoothness to the floor
• Tata Black is non toxic and non inflammable
• Tata Black exhibits permanent colour stability, never fading.

 

Uses:

• Tata Black is highly suitable for colouring of cement and mosaic floors, tiles, dadoes, plastic works and colour wash.

Procedure of Application:

• Mix Tata Black and the standard (ISI mark) quality cement (white mixture of the two) in the ratio of 1:4 or 1:5 depending upon the depth of the colour.
• Tata Black and quality cement have to be mixed properly in a dry state by rubbing the mixture with both hands.
• Add water slowly while mixing
• The addition of water must be monitored so that there is sufficient consistency in the mass required for trevoling.
• A day of curing is required after the final finishing.
• On the second day, clean water needs to be poured on the floor, so that a column of 2 mm of water can stand for 3 days.

Precaution:

• For better results, it is necessary to prepare a homogenous mixture of Tata Black and Cement in a dry state before adding water.
• The chore of mixing and application must be done by an experienced mason.
• The dry mixture should be prepared just before applying it.
• The wet floor surface must be protected from dust, direct sun light and damage of any other nature.
• Use of chalk powder with the dry mixture of colours and cement must be avoided as it dilutes the intensity of the colour
• Any contact between Tata Black and acids or acidic materials must be prevented.
• Tata Black may be used for interior as well as exterior applications.

Polishing:

• Buffing and polishing should be undertaken after the floor has been allowed to dry for a week. More time will ensure a better setting.

Covering Capacity:
1 kg of Tata Black, when mixed with cement in the ratio of 1:5 and applied so as to have a floor thickness of 1 mm, will cover the below mentioned floor area:
Tata Black 48 Square Feet


Packing:

• Tata Black is packed in 25 kg and 5 kg laminated HDPE bags with liners and 1 kg-1/2 kg Polyester pouch with a liner.

Product Details:

Salient Features:

• Tata Blue is ideally suited for flooring and they have the best mobility with cement.
• Resistance to alkali and light fastness are excellent
• Tata Blue furnishes the floor with a bright, shiny and smooth surface.
• Tata Blue is non toxic and non inflammable
• Tata Blue has permanent colour stability and resists fading.

 

Uses:

• Tata Blue is highly apt for colouring of cement and mosaic floors, tiles, dadoes and plastic works colour wash.

Procedure of Application:

• Mix Tata Blue and the standard (ISI mark) quality cement (white mixture of the two) in the ratio of 1:4 or 1:5 depending upon the depth of the colour.
• Tata Blue and quality cement have to be mixed properly in a dry state by rubbing the mixture with both hands.
• Add water slowly while mixing.
• The addition of water must be monitored so that there is sufficient consistency in the mass required for trevoling.
• A day of curing is required after the final finishing.
• On the second day, clean water needs to be poured on the floor, so that a column of 2 mm of water can stand for 3 days.

 

Precaution:

• For better results, it is necessary to prepare a homogenous mixture of Tata Blue and Cement in a dry state before adding water.
• The chore of mixing and application must be done by an experienced mason.
• The dry mixture should be prepared just before applying it.
• The wet floor surface must be protected from dust, direct sun light and damage of any other nature.
• Use of chalk powder with the dry mixture of colours and cement must be avoided as it dilutes the
• intensity of the colour
• Any contact between Tata Blue and acids or acidic materials must be prevented.
• Tata Blue may be used for interior and protected exterior surface only.
• Tata Blue is not recommended for exterior use because of its poor light stability.

 

Polishing:

• Buffing and polishing should be undertaken after the floor has been allowed to dry for a week. More time will ensure a better setting.

Covering Capacity:

1 kg of Tata Blue, when mixed with cement in the ratio of 1:5 and applied so as to have a floor thickness of 1 mm, will cover the below mentioned floor area:
Tata Blue                              34 square feet


Packing:

• Tata Blue is packed in 1 kg and 500 HMHDPE pouch with a liner.

Product Details:

Salient Features:

• Tata Green is ideally suited for flooring and they have the best mobility with cement.
• Light fastness and alkali resistance are excellent
• Tata Green furnishes the floor with a bright, shiny and smooth surface.
• Tata Green is non toxic and non inflammable
• Tata Green has permanent colour stability and resists fading.

 

Uses:

• Tata Green is highly apt for colouring of cement and mosaic floors, tiles, dadoes and plastic works colour wash.

Application Procedure:

• Complete and careful mixing of the Tata Green colours and cement is imperative for best results. Tata Green should be mixed with grey or white cement in the proportion 1:3 or 1:4 (colour of cement), depending upon the desired depth of the colour- [Grey cement is recommended for deep shades and white cement for pastel shades].
• Moreover, to eliminate the occurrence of patches and also to produce a smooth and uniform finish, the colorant and cement must be mixed in a dry state before adding water. The mixture has to be applied by trowelling. A 24 hour gap has to be maintained before curing is undertaken for setting.

 

Precaution:

• For better results, it is necessary to prepare a homogenous mixture of Tata Green and Cement in a dry state before adding water.
• The chore of mixing and application must be done by an experienced mason.
• The dry mixture should be prepared just before applying it.
• The wet floor surface must be protected from dust, direct sun light and damage of any other nature.
• Use of chalk powder with the dry mixture of colours and cement must be avoided as it dilutes the intensity of the
• colour
• Any contact between Tata Green and acids or acidic materials must be prevented.
• Tata Green may be used for interior applications.
• Tata Green is not recommended for exterior use because of its poor light stability.

Covering Capacity:
1 kg of Tata Green, when mixed with cement in the ratio of 1:5 and applied so as to have a floor thickness of 1 mm, will cover the below mentioned floor area:
Tata Green 34 square fee

Polishing:

• Buffing and polishing should be undertaken after the floor has been allowed to dry for a week. More time will ensure better hardening.

Packing:

• Tata Green is packed in 25 kg and 5 kg laminated HDPE bags with liners and 1 kg HMHDPE pouch with a liner.