Synthetic Iron Oxide

Product Details:

Other Name: Synthetic Yellow Iron Oxide

Yellow oxide is a highly concentrated dry powder of the finest grade and is ideally suited for use in paints, rubber, paper, polishing rouge, ceramic, linoleum, wall paper, plastic asphalt,
cement colours, mosaic tiles and flooring. It is also plays a role in foundry core making and ferrite, which is used by the electronic industries.

Other Details:

Conforms to Bureau of Indian Standard Specification No. IS 44-1991

Free From Lead, Chromium And Other Heavy Metals

Salient Features:

Tata Yellow is ideally suited for flooring and they have the best mobility with cement.

Resistance to alkali and light fastness are excellent

Tata Yellow furnishes the floor with a bright, shiny and smooth surface.

Tata Yellow is non toxic and non inflammable

Tata Yellow has permanent colour stability and resists fading.

Uses:

Tata Yellow is highly apt for colouring of cement and mosaic floors, tiles, dadoes and plastic works colour wash.

Application Procedure:
Complete and careful mixing of the Tata Yellow colours and cement is imperative for best results. Tata Yellow should be mixed with grey or white cement in the proportion 1:3 or 1:4 (colour of cement), depending upon the desired depth of the colour- [Grey cement is recommended for deep shades and white cement for pastel shades].
Moreover, to eliminate the occurrence of patches and also to produce a smooth and uniform finish, the colorant and cement must be mixed in a dry state before adding water. The mixture has to be applied by trowelling. A 24- hour gap has to be maintained before curing is undertaken for setting.

Precaution:
For better results, it is necessary to prepare a homogenous mixture of Tata Yellow and Cement in a dry state before adding water.
The chore of mixing and application must be done by an experienced mason.
The dry mixture should be prepared just before applying it.
The wet floor surface must be protected from dust, direct sun light and damage of any other nature.
Use of chalk powder with the dry mixture of colours and cement must be avoided as it dilutes the intensity of the
colour
Any contact between Tata Yellow and acids or acidic materials must be prevented.
Tata Yellow may be used for interior and exterior applications.

Polishing:

Buffing and polishing should be undertaken after the floor has been allowed to dry for a week. More time will ensure better setting.

Covering Capacity:

1 kg of Tata Yellow, when mixed with cement in the ratio of 1:5 and applied so as to have a floor thickness of 1 mm, will cover the below mentioned floor area:
    Tata Yellow                    60 square feet

Packing:

Packed in 25 kg laminated HDPE bags and 1 kg and ½ kg HMHDPE pouch with liner.

 

Product Details:

Salient Features:

• Tata Black is ideally suited for flooring as they have the best mobility with cement.
• Light fastness and alkali resistance are excellent
• Tata Black provides a brightness and smoothness to the floor
• Tata Black is non toxic and non inflammable
• Tata Black exhibits permanent colour stability, never fading.

Uses:

• Tata Black is highly suitable for colouring of cement and mosaic floors, tiles, dadoes, plastic works and colour wash.

Procedure of Application:

• Mix Tata Black and the standard (ISI mark) quality cement (white mixture of the two) in the ratio of 1:4 or 1:5 depending upon the depth of the colour.
• Tata Black and quality cement have to be mixed properly in a dry state by rubbing the mixture with both hands.
• Add water slowly while mixing
• The addition of water must be monitored so that there is sufficient consistency in the mass required for trevoling.
• A day of curing is required after the final finishing.
• On the second day, clean water needs to be poured on the floor, so that a column of 2 mm of water can stand for 3 days.

Precaution:

• For better results, it is necessary to prepare a homogenous mixture of Tata Black and Cement in a dry state before adding water.
• The chore of mixing and application must be done by an experienced mason.
• The dry mixture should be prepared just before applying it.
• The wet floor surface must be protected from dust, direct sun light and damage of any other nature.
• Use of chalk powder with the dry mixture of colours and cement must be avoided as it dilutes the intensity of the colour
• Any contact between Tata Black and acids or acidic materials must be prevented.
• Tata Black may be used for interior as well as exterior applications.

 

Polishing:

• Buffing and polishing should be undertaken after the floor has been allowed to dry for a week. More time will ensure a better setting.

Covering Capacity:
1 kg of Tata Black, when mixed with cement in the ratio of 1:5 and applied so as to have a floor thickness of 1 mm, will cover the below mentioned floor area:
Tata Black                          48 Square Feet


Packing:

• Tata Black is packed in 25 kg and 5 kg laminated HDPE bags with liners and 1 kg-1/2 kg Polyester pouch with a liner.

Product Details:

Tata Red is a highly concentrated dry powder of the finest grade and is ideally suited for use in cement floors. It is light and alkali fast, non-toxic and inflammable and produces attractive shades. A floor made of TATA RED can withstand repeated washing with water and can be polished with any floor polishing materials and be buffed. It has the following characteristics:

Salient Features:

• Tata Red is ideally suited for flooring and they have the best mobility with cement.
• Resistance to alkali and light fastness are excellent
• Tata Red furnishes the floor with a bright, shiny and smooth surface.
• Tata Red is non toxic and non inflammable
• Tata Red exhibits permanent colour stability and resists fading.

Uses:

• Tata Red is highly apt for colouring of cement and mosaic floors, tiles, dadoes and plastic works colour wash.

 

Application:
Procedure Of Application:

• Mix Tata Red and the standard (ISI mark) quality cement (white mixture of the two) in the ratio of 1:4 or 1:5 depending upon the depth of the colour.
• Tata Red and quality cement have to be mixed properly in a dry state by rubbing the mixture with both hands.
• Add water slowly while mixing
• The addition of water must be monitored so that there is sufficient consistency in the mass required for trevoling.
• A day of curing is required after the final finishing.
• On the second day, clean water needs to be poured on the floor, so that a column of 2 mm of water can stand for 3 days.

 

Precaution:

• For better results, it is necessary to prepare a homogenous mixture of Tata Red and Cement in a dry state before adding water.
• The chore of mixing and application must be done by an experienced mason.
• The dry mixture should be prepared just before applying it.
• The wet floor surface must be protected from dust, direct sun light and damage of any other nature.
• Use of chalk powder with the dry mixture of colours and cement must be avoided as it dilutes the
• intensity of the colour
• Any contact between Tata Red and acids or acidic materials must be prevented.
• Tata Red may be used for interior and exterior applications.

 

Polishing:

• Buffing and polishing should be undertaken after the floor has been allowed to dry for a week. More time will ensure a better setting.

Covering Capacity:

• 1 kg of Tata colour, when mixed with cement in the ratio of 1:5 and applied so as to have a floor thickness of 1 mm, will cover the below mentioned floor area:

Tata Red 38 square feet

Technical Data Sheet:

Product Details:

Colours for Cement Floors - Tata Red Oxide:
Tata Red is a highly concentrated dry powder of the finest grade and is ideally suited for use in cement floors. It is light and alkali fast, non-toxic and inflammable and produces attractive shades. A floor made of TATA RED can withstand repeated washing with water and can be polished with any floor polishing materials and be buffed. It has the following characteristics:

Salient Features:

• Tata Red is ideally suited for flooring and they have the best mobility with cement.
• Resistance to alkali and light fastness are excellent
• Tata Red furnishes the floor with a bright, shiny and smooth surface.
• Tata Red is non toxic and non inflammable
• Tata Red exhibits permanent colour stability and resists fading.

 

Uses:

• Tata Red is highly apt for colouring of cement and mosaic floors, tiles, dadoes and plastic works colour wash.

 

Procedure Of Application:

• Mix Tata Red and the standard (ISI mark) quality cement (white mixture of the two) in the ratio of 1:4 or 1:5 depending        upon the depth of the colour.
• Tata Red and quality cement have to be mixed properly in a dry state by rubbing the mixture with both hands.
• Add water slowly while mixing
• The addition of water must be monitored so that there is sufficient consistency in the mass required for trevoling.
• A day of curing is required after the final finishing.
• On the second day, clean water needs to be poured on the floor, so that a column of 2 mm of water can stand for 3 days.

 

Precaution:

• For better results, it is necessary to prepare a homogenous mixture of Tata Red and Cement in a dry state before adding water.
• The chore of mixing and application must be done by an experienced mason.
• The dry mixture should be prepared just before applying it.
• The wet floor surface must be protected from dust, direct sun light and damage of any other nature.
• Use of chalk powder with the dry mixture of colours and cement must be avoided as it dilutes the
• intensity of the colour
• Any contact between Tata Red and acids or acidic materials must be prevented.
• Tata Red may be used for interior and exterior applications.

Polishing:

• Buffing and polishing should be undertaken after the floor has been allowed to dry for a week. More time will ensure a better setting.

Covering Capacity:
1 kg of Tata colour, when mixed with cement in the ratio of 1:5 and applied so as to have a floor thickness of 1 mm, will cover the below mentioned floor area:
Tata Red                              38 square feet

Product Details:

Other Details:

• Conforms to Bureau of Indian Standard Specification No. IS 44-1991

Technical Specifications:

Product Details:

Other Details:

• Conforms to Bureau of Indian Standard Specification No. IS 44-1991

Technical Specifications:

Product Details:

Features:

• Use No Hook

Other Details:

• Free From Lead, Chromium And Other Heavy Metals

Technical Specifications:

Product Details:

Red Oxide is a highly concentrated dry powder of the finest grade and is ideally suited for use in paints, rubber, paper, polishing rouge, ceramic, linoleum, wall paper, plastic asphalt, cement colours, mosaic tiles and flooring. It is also plays a role in foundry core making and ferrite, which is used by the electronic industries. In fact, Tata Pigments Ltd is the proud recipient of the Bureau of Indian Standards License for Synthetic Red Iron Oxide. The product quality conforms to IS 44:1991 Grade 2. Presently, Red Iron Oxide is manufactured in four particular shades /tones, in accordance with the Bureau of Indian Standards Colours IS 5: 1994.

Technical Data Sheet: